Lenticular Lens Arrays, Projection Screens :
Ultra-Precision Micro Machining / Conturing System

 The MLA4000 ULTRA PRECISION MICRO MACHINING / CONTOURING SYSTEM and our post machining replication technology allow the designer freedom to create new and high quality components. We offer a unique combination of options for the fabrication of products which include three dimensional optics, forms and arrays.

Click to download complete Diamond Machining Bulletin (.pdf)  

The MLA4000 ULTRA PRECISION MICRO MACHINING/CONTOURING SYSTEM is pictured above. The pattern being machined into the substrate is a High Aspect Ratio, Fine Pitch Lenticular Lens Array. The Spindle and Carriage are Air Bearing supported for maximum optical surface quality of the fabricated part. Pictured below are the Cutting Head, Diamond Tools, and a closer view of the substrate being machined on the MLA4000 SYSTEM.

Cutting Head
with Shroud

The CUTTING HEAD is a variable speed, 6” diameter air bearing supported spindle. The Cutting Head Tool Adapter is designed to accommodate six individual Single Crystal Cutting Diamonds. The Single Crystal Roughing and Finishing Diamonds are manufactured with the required contours and mounted in the Cutting Head. By combining up to six different shaped diamonds in the Cutting Head, complex features can be machined into the substrate.

A pure copper substrate is shown being contoured with a high aspect ratio lenticular lens array pattern on the MLA4000 System. The optical quality surface finish of the lens contour reflects the image of the air supply hose and housing. The MLA4000 has an X-Y machining capacity of 1.0 X 1.02 meters, (39.37” x 40”). For larger products, the MLA5400 has an X-Y machining capacity of 1.37 X 1.52 meters. (54” x 60”).

SCIENTIFIC/TECHNICAL OPTICS Lenticular Lens Arrays, Light Shaping Diffusers, Corner Cube Reflectors/Absorbers, Light Pipe Arrays, and other Macro/Micro Optical Arrays.
Micro custom 3D Calibration Artifacts. (Such as Step Wedge Standards that are used for non-destructive X-Ray analysis of material density/thickness.)

PRECISION THREE DIMENSIONAL TOOLING STRUCTURES: 3D High Aspect Ratio/High Strength Forms such as Screen Molds for the production of Ultra Fine Mesh, Tension Screens and Electroforming Mandrels.

ELECTRONIC IMAGING: Front and Rear Projection Screens for Display Terminals, Rear Projection TV and Flat Panel Displays. Miniature Optical Arrays for Stereoscopic, Micro-Surgical and other Custom Imaging Devices.

PUBLISHED GRAPHICS: AnimatedArt, 3D Art, and 3D Animated Art for Print Advertising, Trade Show Exhibits, Point of Purchase Graphic Displays, Video Arcade Game Displays, Menu Boards, Billboards and Advertising Specialties.